powerplus dc ? optically isolated mosfet output ? ratings from 10a to 100a @ 72 vdc ? ac and dc control ? relays are easily paralleled for higher-current applications ? led status indicator ? optional ip20 cover ? ul recognized, ce and rohs compliant ? pwm to 1k hz product selection control voltage 10a 20a 40a 60a 80a 100a 4-32 vdc dc100d10 dc100d20 dc100d40 dc100d60 dc100d80 dc100d100 90-140 vac dc100a10 DC100A20 dc100a40 dc100a60 available options output specifications (1) description 10a 20a 40a 60a 80a 100a operating voltage [vdc] (2) 1-72 vdc 1-72 vdc 1-72 vdc 1-72 vdc 7-72 vdc 7-72 vdc blocking voltage 100 100 100 100 100 100 rated load current [adc] (3) 10 20 40 60 80 100 minimum load current [ma] (4) 2.5 2.5 2.5 2.5 2.5 2.5 maximum surge current [adc] (10ms) 66 91 136 167 215 272 maximum on-state voltage drop @ rated current [vdc] 0.32 0.34 0.6 00.6 0.72 0.56 maximum off-state leakage current @ rated voltage [ma] 0.15 0.15 0.15 0.15 0.15 0.15 thermal resistance juncti on to case (rjc) [c/w] 1.44 0.85 0.78 0.58 0.55 0.42 maximum on-state resistance @ rated current [rds-on][mohms] 32 17 15 10 9 5.6 maximum pwm [hz] (5) 1k 1k 900 900 700 700
input specifications (1) description dcxxxdxx dcxxxaxx control voltage range 4-32 vdc 90-140 vac minimum input current @ min control voltage [ma] 11 11 maximum input current @ max control voltage [ma] 12 13 nominal input impedance current regulated current regulated maximum turn-on time [msec] 0.075 10 maximum turn-off time [msec] 0.32 10 general specifications description parameters dielectric strength, input/output/base (50/60hz) 2500 vrms minimum insulation resistance (@ 500 v dc) 10 9 ohm maximum capacitance, input/output 10 pf ambient operating temperature range (6) -30 to 80c ambient storage temperature range -40 to 125 c housing material valox 420 seo black, ul 94 v-0 weight (typical) (7) 2.65 oz (75g) encapsulation (8) epoxy free terminal finish electroless nickel recommended terminal screw torque (6-32) [in lbs/nm] 10/1.1 recommended terminal screw torque (8-32) [in lbs/nm] 20/2.2 general notes 1) all parameters at 40c and per section unless otherwise specified. 2) maximum voltage is 100vdc 3) heat sinking required, see derating curves. 4) low current loads and high ambient temperature can affect turn-on time. 5) @ a minimum of 8vdc control. see pwm derating information page 3. 6) maximum ambient operating temperature for the ac control relays is 65c. 7) typical weight for the ac control relays is 2.99 oz/85g. 8) ac controlled relays contain thermal conductive epoxy. mechanical specifications
wiring diagram pwm derate information agency approvals iec 61000-4-2 electrostatic discharge level 3, criteria a iec 61000-4-4 electrically fast transients level 3, criteria a iec 61000-4-5 electrical surges level 3, criteria a e116950 072312
thermal derate information
annex - enviromental information
|
